ProEpoxy serves Markham businesses and homeowners - from tech campus ESD floors in Unionville to residential garage epoxy in Cornell. Certified crews, no travel fees.
Markham combines one of the largest technology and office clusters in Canada with a deep residential base and the Milliken industrial lands. The work reflects that split: office, data and clean-facility floors along the Highway 404 and 407 corridors, industrial and warehouse systems in Milliken, and a steady volume of residential garage and basement coating across the city's subdivisions.
Markham is inside our standard service zone with no travel surcharge and the same pricing as Toronto. Commercial and office work is scheduled around tenant operations, usually evenings or weekends.
We install epoxy flooring throughout Markham, including:
Our Markham work falls into three groups, each with different requirements:
The Highway 404 and 407 cluster is what makes Markham different from the rest of our service area. Server rooms, equipment rooms and electronics handling areas need anti-static systems installed to ANSI/ESD S20.20, with the grounding verified rather than assumed. Office interiors more often go to polished concrete than to a coating. All of this work is scheduled around tenant operations, so evening and weekend installation is normal here.
Milliken and the Steeles corridor hold warehousing, light manufacturing and distribution floors. Forklift rating, abrasion resistance and accurate aisle marking are the baseline, with chemical resistance added where there is processing or servicing on the floor.
Garage coatings across Berczy, Cornell, Unionville and Markham Village are the steady residential volume. Cornell's rear-lane garages are smaller and faster than a typical attached garage. Basements range from utility floors to flake and metallic recreation rooms.
Pricing in Markham matches our Toronto pricing. There is no travel surcharge and no regional premium. Standard garage flake epoxy runs $3 to $5 per square foot. Commercial and industrial systems run $5 to $8 per square foot. Metallic and decorative finishes run $8 to $12 per square foot. Where slab testing shows elevated moisture, a mitigation primer adds $1 to $2 per square foot. Commercial and industrial floors are quoted per project after a free site assessment, because the right system depends on exposure and traffic rather than area alone. Every quote is written and follows a site visit.
No. Markham is inside our standard service zone, about 30 km north east of downtown Toronto, and the pricing is identical to our Toronto rates. Residential scheduling runs 1 to 2 weeks for residential.
A standard single or double garage in Markham is a one-day install. We grind the slab, repair cracks, apply the base coat and broadcast flake or colour the same day, then return for the topcoat where the system calls for one. You can usually walk on it after 24 hours and park on it after 72.
Yes. Anti-static and conductive systems are installed to ANSI/ESD S20.20, with a grounding grid tied into the building earth and resistance verified by measurement after installation rather than assumed from the product data sheet. This is routine work for us along the Highway 404 and 407 technology corridor.
Free on-site assessment. Written quote. No pressure. Our crew is in Markham regularly - we can schedule quickly.